Quick Answer: As of July 2026, replacing a R-Panel Metal Roof in the Dallas–Fort Worth, Texas area typically costs $650–$1,400 per square (100 sq ft) installed, or approximately $6.50–$14.00 per square foot. The estimated average market price for a typical project is $1,025 per square installed (~$10.25 per sq ft).
Roof Assumptions
- R-Panel metal roofing panels
- Single-story ranch
- 6/12 roof pitch
- Tear-off of one existing layer of felt and roofing material
- Typical Dallas, Texas market conditions
- No unusual roof complexity, skylights, or significant decking replacement
- All City Permits to be reviewed and approved
Average Installed Price per Square (100 sq ft)
| Contractor Type | Typical Price per Square | Price per Sq Ft (approx.) |
| Budget contractor | $650–$700 | $6.50–$7.00 |
| Average reputable contractor | $700–$800 | $7.00–$8.00 |
| Premium contractor | $850–$1400+ | $8.50–$14.00+ |
Estimated average market price for the described roof: $1,025 per square installed (approximately $10.25 per sq ft).
Typical Scope Included
- Tear-off of one existing layer
- Disposal
- Synthetic or ASTM-compliant felt underlayment
- Ice & water protection where required
- Starter shingles
- R-Panel metal roofing panels
- Ridge cap shingles
- Drip edge where required
- Pipe boots
- Standard flashing replacement
- Standard ventilation components
- Labor, cleanup, and contractor overhead & profit
Typical Cost Adders
| Upgrade | Typical Additional Cost |
| 26-gauge panel upgrade | +$75–175/square |
| Premium paint system (PVDF/Kynar) | +$50–125/square |
| Steeper than 8/12 | +40–100/square |
| Two-story home | +$25–75/square |
| Deck replacement | $85–150 per 4×8 sheet |
| Complex roof layout | +10–25% |
Insurance / Xactimate Perspective
Typical retail homeowner pricing is approximately $625–775 per square. Typical Dallas–Fort Worth Xactimate pricing varies by manufacturer profile, accessory package, and installation requirements. When premium ridge, starter, flashings, ventilation, and manufacturer-required accessories are included, effective replacement costs commonly reach or exceed $1,025 per square.
Class 4 Impact Resistance
R-Panel metal roofing panels are not inherently Class 4 impact resistant. Many premium luxury product lines are available with a UL 2218 Class 4 impact-resistance rating, while others are not. Whether a roof qualifies as a Class 4 roofing system depends on the specific manufacturer and product selected. Owners seeking insurance premium discounts or projects requiring a Class 4 roof should verify that the selected shingle carries an official UL 2218 Class 4 rating.
Conclusion
For the roof described, a fair current market expectation in the Dallas–Fort Worth area is approximately $1,025 per square installed, with a reasonable range of $650–1,400 per square depending on contractor, materials, and project-specific conditions.
Frequently Asked Questions
How much does it cost to replace a R-Panel Metal Roof in Dallas–Fort Worth, Texas?
For the roof described, a fair current market expectation in the Dallas–Fort Worth area is approximately $1,025 per square installed, with a reasonable range of $650–1,400 per square depending on contractor, materials, and project-specific conditions.
What is the average price per square foot for a R-Panel Metal Roof replacement in Dallas–Fort Worth, Texas?
Based on current Dallas–Fort Worth, Texas market pricing, a R-Panel Metal Roof typically costs between $6.50 and $14.00 per square foot installed, averaging approximately $10.25 per square foot (equivalent to $1,025 per 100-square-foot roofing square).
Notice Regarding Pricing: The prices set forth in this document are estimates only and are based on current market conditions. Each property must be inspected in person before a final cost quote can be produced, as every project is unique and will be treated as such. Prices are subject to adjustment at any time without prior notice, including but not limited to changes in fuel prices, material costs, labor costs, or other factors beyond our control. Prices should not be considered fixed or guaranteed unless explicitly stated otherwise in a signed agreement.