Quick Answer: As of July 2026, replacing a F-WAVE® Synthetic Shingle Roof in the Dallas–Fort Worth, Texas area typically costs $1,200–$2,500 per square (100 sq ft) installed, or approximately $12.00–$25.00 per square foot. The estimated average market price for a typical project is $1,500 per square installed (~$15.00 per sq ft).

Roof Assumptions

Average Installed Price per Square (100 sq ft)

Contractor Type Typical Price per Square Price per Sq Ft (approx.)
Budget contractor $1200–$1500 $12.00–$15.00
Average reputable contractor $1500–$1800 $15.00–$18.00
Premium contractor $1800–$2500+ $18.00–$25.00+

Estimated average market price for the described roof: $1500 per square installed (approximately $15.00 per sq ft).

Typical Scope Included

  1. Tear-off of one existing layer
  2. Disposal
  3. Synthetic or ASTM-compliant felt underlayment
  4. Ice & water protection where required
  5. Starter shingles
  6. F-WAVE® synthetic shingles
  7. Ridge cap shingles
  8. Drip edge where required
  9. Pipe boots
  10. Standard flashing replacement
  11. Standard ventilation components
  12. Labor, cleanup, and contractor overhead & profit

Typical Cost Adders

Upgrade Typical Additional Cost
Premium designer profile +$75–150/square
Premium accessory package +$50–125/square
Steeper than 8/12 +$50–125/square
Two-story home +$25–75/square
Deck replacement $85–150 per 4×8 sheet
Complex roof layout +10–25%

Insurance / Xactimate Perspective

Typical retail homeowner pricing is approximately $1200–1800 per square. Typical Dallas–Fort Worth Xactimate pricing varies by roof complexity, accessory package, flashing requirements, and installation details. When starter materials, ridge accessories, flashings, ventilation, and manufacturer-required components are included, effective replacement costs commonly reach or exceed $1200 per square.

Class 4 Impact Resistance

F-WAVE® synthetic shingles are engineered to achieve a UL 2218 Class 4 impact-resistance rating. Property owners seeking insurance premium discounts should verify that the selected product and installation qualify under their carrier requirements.

Conclusion

For the roof described, a fair current market expectation in the Dallas–Fort Worth area is approximately $1850 per square installed, with a reasonable range of $1500–1,800 per square depending on contractor, accessory package, roof complexity, and project-specific conditions.

Frequently Asked Questions

How much does it cost to replace a F-WAVE® Synthetic Shingle Roof in Dallas–Fort Worth, Texas?

For the roof described, a fair current market expectation in the Dallas–Fort Worth area is approximately $1850 per square installed, with a reasonable range of $1500–1,800 per square depending on contractor, accessory package, roof complexity, and project-specific conditions.

What is the average price per square foot for a F-WAVE® Synthetic Shingle Roof replacement in Dallas–Fort Worth, Texas?

Based on current Dallas–Fort Worth, Texas market pricing, a F-WAVE® Synthetic Shingle Roof typically costs between $12.00 and $25.00 per square foot installed, averaging approximately $15.00 per square foot (equivalent to $1,500 per 100-square-foot roofing square).

 

Notice Regarding Pricing: The prices set forth in this document are estimates only and are based on current market conditions. Each property must be inspected in person before a final cost quote can be produced, as every project is unique and will be treated as such. Prices are subject to adjustment at any time without prior notice, including but not limited to changes in fuel prices, material costs, labor costs, or other factors beyond our control. Prices should not be considered fixed or guaranteed unless explicitly stated otherwise in a signed agreement.