As of July 2026, replacing a Standing Seam Metal Roof in the Dallas, Texas area typically costs $1,000–$1,700 per square (100 sq ft) installed, or approximately $10.00–$17.00 per square foot. The estimated average market price for a typical project is $1,225 per square installed (~$12.25 per sq ft).
Roof Assumptions
- Standing seam metal roofing system
- Single-story ranch
- 6/12 roof pitch
- Tear-off of one existing layer of felt and roofing material
- Typical Dallas, Texas market conditions
- No unusual roof complexity, skylights, or significant decking replacement
- All City Permits to be reviewed and approved
Average Installed Price per Square (100 sq ft)
| Contractor Type | Typical Price per Square | Price per Sq Ft (approx.) |
|---|---|---|
| Budget contractor | $1000-$1200 | $10.00-$12.00 |
| Average reputable contractor | $1200-$1350 | $12.00-$13.50 |
| Premium contractor | $1350-$1700+ | $13.50-$17.00+ |
Estimated average market price for the described roof: $1,225 per square installed (approximately $12.25 per sq ft).
Typical Scope Included
- Tear-off of one existing layer
- Disposal
- Synthetic high-temperature underlayment
- Ice & water protection where required
- Manufacturer-approved starter and edge components
- Standing seam metal panels
- Matching ridge and hip components
- Drip edge where required
- Pipe boots and penetration flashings
- Standard flashing replacement
- Standard ventilation components
- Labor, cleanup, and contractor overhead & profit
Typical Cost Adders
| Upgrade | Typical Additional Cost |
|---|---|
| 24-guage steel panel | +$75–150/square |
| Premium PVDF (Kynar 500®) finish | +$50–125/square |
| Steeper than 8/12 | +$75–175/square |
| Two-story home | +$50–125/square |
| Deck replacement | $85–150 per 4×8 sheet |
| Complex roof layout | +15–35% |
Insurance / Xactimate Perspective
Typical retail homeowner pricing is approximately $1,100–1,350 per square. Typical Dallas Xactimate pricing for standing seam metal roofs varies significantly based on panel gauge, finish, attachment system, trim, and flashing details. When manufacturer-required accessories, custom flashings, ridge components, and trim packages are included, the effective replacement cost commonly reaches or exceeds $1,200 per square.
Conclusion
For the roof described, a fair current market expectation in the Dallas area is approximately $1,225 per square installed, with a reasonable range of $1,100–1,350 per square for a typical project and higher pricing for premium materials or complex installations.
Frequently Asked Questions
How much does it cost to replace a Standing Seam Metal Roof in Dallas, Texas?
For the roof described, a fair current market expectation in the Dallas area is approximately $1,225 per square installed, with a reasonable range of $1,100–1,350 per square for a typical project and higher pricing for premium materials or complex installations.
What is the average price per square foot for a Standing Seam Metal Roof replacement in Dallas, Texas?
Based on current Dallas, Texas market pricing, a Standing Seam Metal Roof typically costs between $10.00 and $17.00 per square foot installed, averaging approximately $12.25 per square foot (equivalent to $1,225 per 100-square-foot roofing square).
Notice Regarding Pricing: The prices set forth in this document are estimates only and are based on current market conditions. Each property must be inspected in person before a final cost quote can be produced, as every project is unique and will be treated as such. Prices are subject to adjustment at any time without prior notice, including but not limited to changes in fuel prices, material costs, labor costs, or other factors beyond our control. Prices should not be considered fixed or guaranteed unless explicitly stated otherwise in a signed agreement.